Make an Appointment

Edit Template

Torch Down, EPDM & TPO Roofing Services in NYC

We install and repair torch down, EPDM, and TPO roofs across New York City. These flat roofing systems are common on both homes and commercial buildings. Our trained team handles new installs, replacements, and repairs. We work in Brooklyn, Queens, Manhattan, Bronx, and Staten Island.

Flat roofs need special care and the right materials. We use the correct tools and proven steps for every job. We follow all city rules and help with permits when needed. Below is more about each type of roof system we work with.

EPDM rubber roofing installation on flat roof in NYC

Torch Down Roofing

Torch down roofing is made from layers of modified bitumen. It is heated with a torch to stick to the roof surface. This creates a strong, waterproof seal. It is a good choice for flat or low-slope roofs.

We start by cleaning and checking the old roof. Then we add a base layer and heat the top layer. Our team moves with care to keep the surface even. We work in small sections and seal all edges.

Torch down roofing resists water, heat, and UV rays. It lasts 15 to 20 years with good care. It also works well in NYC weather. We fix leaks or cracks if your roof is worn. We also replace full torch down systems if needed. Torch down is often used on homes, sheds, garages, and small buildings. It is also common on stores and low-rise commercial properties.

Close-up view of a flat roof surface after installation, showing layers of roofing membrane.Torch Down, EPDM & TPO Roofing

EPDM Roofing

EPDM is a rubber roofing system. It is black or white and comes in large rolls. The material is flexible and holds up well in tough weather. It can stretch without cracking and resists water and UV.

We install EPDM on flat or low-pitch roofs. First, we clean the roof and check for weak spots. Then we roll out the EPDM and glue it in place. The seams are sealed to keep water out.

We also do EPDM repairs. If your rubber roof is torn or leaking, we can fix it. We patch holes and reseal old seams. We also add layers if needed.

EPDM is good for homes, warehouses, and offices. It lasts about 20 years and needs little care. It is easy to patch and cost-effective.

White TPO roofing system installed on flat roof in NYC

TPO Roofing

TPO is a white single-ply roof system. It helps lower heat inside the building. It is made from plastic and rubber. TPO works well in hot sun and reflects light.

We install TPO on many types of flat roofs. We clean and prep the surface. Then we roll out the sheets and seal them with heat. This melts the seams together.

TPO roofs are strong and light. They resist mold, dirt, and tears. They last around 20 years with care. We fix rips or worn spots fast and cleanly. TPO is used on homes, malls, hospitals, and more. It is good for green buildings and helps with energy use.

We help pick the best type for your roof. Each system has pros based on your needs. Our team explains the cost, time, and life span of each one.

We bring all tools and keep your site clean. We check all edges and drains. We remove waste and clean up after the job.

Our Flat Roofing Services

We offer full service for torch down, EPDM, and TPO systems:

Why Choose Us for Flat Roofing in NYC

We work across all five boroughs and nearby areas. Our team shows up on time and respects your space. We talk through your options and help with permits. We work by the rules and follow all local codes.

We give fair prices and clear quotes. You will see the cost before we start. We do not change prices after the job begins.

Our workers are trained in flat roof systems. We know how to install, fix, and replace all types. We use the right materials and tools for each job.

Our Service Areas

We offer torch down, EPDM, and TPO roofing in: We also work in Long Island and Westchester. Call us to ask if we come to your town.

Our Process

This process keeps everything simple. You always know what is next.

You call or message us

We set a site visit

We inspect your roof and write a quote

You approve the work

We start on the set date

We install or repair the roof

We clean up and check the work

You get a strong and safe roof

Testimonial

Client Reviews

FAQ – Flat Roofing Systems

Torch down, EPDM, and TPO all work well. We help you choose based on your roof type and needs.

Most last 15–25 years with care. TPO and EPDM last around 20 years. Torch down lasts 15–20 years.

Yes. We repair holes, seams, and flashing. We also replace small sections if needed.

Yes. TPO reflects sun heat and helps lower your energy use.

Yes. We remove old layers, clean the roof, and install new material.

Yes. Flat systems work on homes, garages, and sheds. They are safe and durable.

Some jobs need a permit. We help you with the process.

We check the slope and drains. We can level the surface to fix ponding.

 Yes, but only on some types and with care. Ask us if it’s safe.

Yes. We give a written warranty based on the roof type and job.

Request a Free Estimate

Call or message us today for a free quote. We’ll visit your site and check your roof. You’ll get a fair price and full work plan.

Phone

(347) 577-2852

EMail

bilal@makkahconstruction.com

Hours

Monday to Saturday, 8am to 6pm

Emergency Roof Help

24/7 Service Available

Residential home with shingle roofing, representing a roofing contractor ready to provide a free quote.

Strong Flat Roofing for NYC

We install and repair torch down, EPDM, and TPO systems across NYC. We follow city rules and give clear, clean work. Call us today to get started.

Trusted roofing services across NYC and nearby areas. Quality work, fair pricing, and lasting results.

Monday – Saturday

8:00 AM to 6:00 PM
Closed on Sundays

© 2025 Roofing Contractor NYC. All Rights Reserved.